Transit Time Sensor For Measurement
Documentation
- User Manual(PDF 1.09mb)
- Data Sheet (PDF 597kb)
- Quick Start Guide(PDF 721 kb)
Overview
- Secure Detection of black objects also in extremely inclined positions with WinTec !
- Analog Output (0...10 V/4...20 mA)
- Graphical display for easy operation
- Reliable in case of glossy objects with WinTec
- Two mutually independent switching outputs
The Wenglor interfere-free technology, WinTec, revolutionizes the sensor technology. Mounting of several sensors directly next to, or opposite each other without influencing them is now possible. Improved Job Safety for your Eyes thanks to Laser Class 1, which is safe for the human eye after EN 60825-1. These sensors with scratch-resistant optic cover also reach a very high switching frequency.
Light Spot
The Light Spot is readily visible, even over great distances, allowing for easy adjustment and initial start up. The very fine light beam ensures a small diameter spot meaning even smallest parts can be recognized.
Transit Time Sensors for Measuring Tasks
According to the sensor type these sensors work directly on the object or function with a reflector. These sensors havegreat measuring ranges and recognize objects in far distances.
Adjustments
The adjustments are made by the push of a button or over the menu-driven Display or external via the RS-232 interface. A wenglor configuration software with graphical desktop provides a simple and fast adjustment.
Display
The novel OLED Display guarantees a simple adjustment of the sensors. Measuring values are readable immediately.
Laser Class
Sensors with laser class 1 have the smallest laser capacity according to EN 60825-1 and make warning signs redundant. Due to their higher light capacity, sensors with laser class 2 achieve better specifications.
Specs
| Electrical Data | |
| Supply Voltage | 18...30 V DC |
| Current Consumption (Ub = 24 V) | < 70 mA |
| Switching Frequency | 250 Hz |
| Measurement Rate | 1...500 /s |
| On-/Off-Delay | 0...10000 ms |
| Temperature Drift (Tu > -10 °C) | < 0,2 mm/K |
| Temperature Drift (Tu < -10 °C) | < 0,4 mm/K |
| Temperature Range | -40...50 °C |
| Switching Outputs | 2 |
| Switching Output Voltage Drop | < 2,5 V |
| Switching Output / Switching Current | 100 mA |
| Analog Output | 0...10 V / 4...20 mA |
| Short Circuit Protection | yes |
| Reverse Polarity and Overload Protection | yes |
| Teach Mode | HT,VT,FT,TP |
| Interface | IO-Link |
| IO-Link Version | 1 |
| Protection Class | III |
| Mechanical Data | |
| Adjustment | Teach-In |
| Housing Material | Plastic |
| Degree of Protection | IP68 |
| Connection | M12 × 1; 4-pin |
| Output | |
| Error Output | yes |
| Contamination Output | yes |
| Configurable as PNP/NPN/Push-Pull | yes |
| Analog Output | yes |
| IO-Link | yes |
Applications
- Recognition of objects at great distances
- Position detection for factory conveyor vehicles
- Loop controls
- Fill-level control
- Position detection for electrical overhead conveyors
- Shelf-full messages for automated rack systems
- Edge recognition
- Object counting
- Monitoring openings
- Drill breakage monitoring
- Recognition of extremely small parts
