UMD Ultrasonic Sensors-UMD402U035
Documentation
- Data Sheet (PDF 565kb)
Overview
- Digital and Analog Output
- Stainless Steel Housing
- Synchronous Mode
- Temperature Drift eliminable
Wenglor Ultrasonic Sensors evaluate the sound reflected by the object. They detect almost every object and are suited especially for the filling level monitoring of fluids or bulk material or the detection of transparent objects. The sensor detects objects independent from their material, aggregate state, color or transparency. Via the IO-Link interface a comfortable parameterization and fast diagnosis is possible.
Settings
UMD
Configuration is made via Teach-In, externally or via the IO-Link interface.
UMF
Configuration is made via Teach-In and 4-digit 7-segment display, externally or via the IO-Link interface.
UMS
Configuration is made via Teach-In and OLED-Display, externally or via the IO-Link interface.
Synchronous Mode
In the synchronous mode all synchronised sensors send out their ultrasonic impulses at the same time. The synchronised sensors are acting like a sensor with an enhanced scanning range.
Multiplex Mode
In the multiplex mode the sensors are runned in turn, so that parallel sensors can not manipulate each other. Here each sensor works independent.
Interface
Via the IO-Link interface a comfortable parameterization and fast diagnosis is possible. The output data is also available.
Specs
| Ultrasonic Data | |
| Working Range | 50...400 mm |
| Measuring Range | 350 mm |
| Resolution | 500 µm |
| Ultrasonic Frequency | 300 kHz |
| Opening Angle | < 12 ° |
| Service Life (T = +25 °C) | 100000 h |
| Switching Hysteresis | 2 mm |
| Electrical Data | |
| Supply Voltage | 18...30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 20 Hz |
| Response Time | 25 ms |
| Temperature Range | -25...60 °C |
| Switching Outputs | 1 |
| Switching Output Voltage Drop | < 2,5 V |
| PNP Switching Output/Switching Current | 100 mA |
| Analog Output | 0...10 V |
| Synchronization | yes |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link |
| IO-Link Version | 1 |
| IO-Link Parameter | 12 |
| Protection Class | III |
| Mechanical Data | |
| Adjustment | Teach-In |
| Housing Material | Stainless Steel |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4/5-pin |
| Output | |
| PNP NO/NC switchable | yes |
| IO-Link | yes |
| Analog Output | yes |
Applications
- Distance Control
- Fill-level Measurement
- Diameter Measurement Measuring stack heights
- Quality Check Slack control of foils
- Presence Check
